Clearance curtains, end of line fabrics

Your Curtain Measuring Guide

Curtain Track

Picture
WIDTH: Measure from one end of the track to the other.

LENGTH: Measure the length from the top of the track to the point where you want your curtains to finish

Curtain Pole

Picture
WIDTH: Measure the length of the pole visible between the 2 finials (pole ends).

LENGTH: Measure from the bottom of the ring. This will ensure that the pole remains visible once the curtains are hung

Curtain Drop

Picture
  • Sill length curtains finish 1.25cm (1/2 inch) above the sill.
  • Curtains that fall below the sill finish 15cm (6 inches) below.
  • Floor length curtains finish 1.5cm (1/2 inch) from the floor (although you can create a romantic, Bohemian look by having them longer so that they actually trail on the floor).

Measuring for your Curtains

Whatever your project is, either for curtains or for Roman Blinds we will be happy to assist you in your choice of suitable discount fabric.

Take time when measuring to ensure the best possible fit. It is best to use a metal tape measure for accuracy. The first step is to decide whether you want your curtains to hang from a track or pole, both of which should be positioned 15cm (5 inches) above the window and extend 15-20cm (7 inches) either side.

Fit the track or pole before taking measurements.

Measuring width Measure the total width of the track or pole (excluding the finials) – do not measure the window unless it is wall-to-wall. Don’t forget to allow for overlap – this is an additional measurement, normally 2.5cm (1 inch) that allows the hanging curtains to overlap in the middle when they are closed.

Measuring length Before measuring the length, decide whether you want your curtains to fall to the sill, below the sill or to the floor. We suggest that:

  • Sill length curtains finish 1.25cm (1/2 inch) above the sill.
  • Curtains that fall below the sill finish 15cm (6 inches) below.
  • Floor length curtains finish 1.5cm (1/2 inch) from the floor (although you can create a romantic, Bohemian look by having them longer so that they actually trail on the floor).
Measuring curtains for tracks Measure from the top of the track.

Measuring curtains for poles Pencil pleat curtains: Measure from the eye – the small metal ring at the bottom of each curtain ring. This will prevent the pole or rings from being obscured by the curtain.

Tab top and eyelet curtains: Measure from the very top of the pole.

While our curtain are sold in pairs, the dimensions on the pack refer to each individual curtain. The total width of both curtains should be two to two and a half times the width of the track or pole. To help you, the minimum and maximum track and pole widths for each size are listed online and can be found on the curtain packaging.

You can also order matching 50 x 50cm piped or unpiped cushion covers and crescent-shaped fabric tiebacks for a fully-co-ordinated look.